How Does Key Decoder and Pick Tool Work on Locks

Do you know about the link between locks and keys? Different kinds of keys are related with locks. There are no two alike keys for the same lock. You have to make random lock combinations to ensure that the unique key. And when you decide to pick the lock with the key decoder and pick tool, you have to know the kind of locks and decode the cut of key. So, it is important for you to know how key decoder and pick tool work on locks. 

 

Why is each key unique?

In the process of making keys, they are crafted with specific codes that designate what their cut is. Different numbers are assigned on keys, which indicate the depth of each key cut. According to various brands, keys can be made between three to even eight or more cuts on the blade. Each cut is at a random and different depth. That’s the reason that makes each key unique. 

 

What is Key Decoder and Pick Tool?

When you need one or more keys for a lock, you can’t guess the code of the key to make the duplicated keys. You had better use a key decoder and pick tool. It will help you figure out the code of keys and allow you to pick the locks as well. 

 

How Do Key Decoder and Pick Tools Work

Pin Tumbler and Wafer Decoders

Pin Tumbler locks and wafer locks are the most common locks in our daily life. When it comes to locks, you may think of the pin tumbler lock. Pin tumbler locks can be found on your door and padlocks. Wafer locks can be found on your cars, desk drawers. The common decoders are suitable for both pin tumbler locks and wafer locks. 

 

As you decide to use the decoders, you should have the key and know the brand of locks at the same time. Some decoders can not only decode the keys, but also pick the locks. Others are only used to decode keys. You can look at the key and decide the brand of lock. When you decide the brand of locks, it is time to choose the right decoders. The proper decoders will help you duplicate the right keys instead.

 

The decoder seems as a rectangle with a sloping rectangular hole in the middle. You can find numbers at different points in the slope, normally starting at 0 and going up to 7-9.

 

In order to use the decoder, you need to stick the key into the holes and notice which numbered section each cut best fits into, remember the depth of that specific cut. You should measure each of the cuts from the tip of the key to the head. Then, you can write down each of the numbers in sequence.

 

The code of the key is the numbers you get. When you have the spare key, this decoder is helpful. When you have no more keys, you have to find another decoder. 

 

Lishi Decoder Tool

If you have no more spare keys, you can use Lishi Lock Pick to pick the lock and decode the key. Lishi decoder tool can be used to pick the lock and decode the key as well. In order to get the code of the key, you have to pick the lock at first. 

 

The Lishi decoder tool is a flat metal tool with a pick and tension and a chart written on the side. When you use the pick, you need ensure that the little hook should be lining up with numbers on the chart. After picking the lock, you can line up the hook with each pin and write down the related numbers. You will get the code of the key. 

 

If you are looking for decoder tools or lock pick set, you can go to Barhomevip.com to find the proper tools according to your locks. These tools are good quality and cheaper than other site.